Industrial Pumps


We are Manufacturer, Supplier, Exporter of Industrial Pumps, Centrifugal Process Pumps, Polypropylene Pumps, PVDF Pumps (Polyvinylidene Fluoride), Magnetic Drive Centrifugal Pumps & our setup is situated in Nashik, Maharashtra, India.

Centrifugal Process Pumps

Characteristic Curve

Centrifugal Process Pumps Flow

Applications :

Hot and cold water circulation, Cooling water circulation, Drip irrigation, Water supply and building services, Thermic fluid, Jet dyeing, Volatile fluids, Heat exchanger, Condensate handling, Fire fighting system, Environmental engineering, Marine, Refrigeration and cooling tower installation. Chemical, Petrochemical, Pharmaceutical, Refineries, Steel plants, Sugar, Paper, Laminates industries, Textiles, Rubber, Handling of hydrocarbon, Organic and inorganic chemicals, Demineralised (DM) water, Food industries, Salt plants, Power plants and in industries such as Pulp, Fertilizer and other Process industries. Corrosive and Abrasive process chemicals like Acids, Alkaline, Solvents, Slurries, Crystallizing liquids, Nitric ammonia phosphate, Chemical effluents, etc.


Features

Improved efficiency and improved NPSH requirements by the better hydraulic design of impellers (vanes). Low energy costs. Operating costs reduced by trimming the impeller diameter to match the specified duty point. Low vibration level and excellent smooth running characteristics thanks to good suction performance and cavitation free operation across a wide operating range. Casing seal reliably - even in varying operating conditions - by confined casing gasket. Large variety of materials for the perfectly matching pump to the fluid handled. Large range of materials for many applications available as a standard easy to dismantle casing cover and bearing bracket lantern screw are available.


Volute Casing

One piece self-venting volute casing design with end suction and top centerline delivery connections. The pump feet are integrally cast into the volute casing. The feet at bottom transfer residual pipe stress shortest possible route to the base plate and foundation.


Impeller

Depending on process parameters closed or semi-open impellers are given for NPSH requirements. Hydraulically balanced by back vanes, or in the case of large impeller diameters by balancing holes and wear rings on both sides. Reliable fixing of an impeller on the shaft by impeller nut.


Shaft Sealing

Supplied with either gland packing or mechanical seals in a stuffing box with connection for sealing and cooling/flushing liquid. Simple change over from packing to mechanical seal is possible with the aid of standardized conversion kits. Mechanical seal of various makes and seal faces MOC, unbalanced as well as balanced ones can be easily fitted in the standard stuffing box.


Shaft & Bearings

The shaft is guided in oil lubricated angular contact and cylindrical roller bearings. The alignment of bearings is ensured by appropriate centering and modern manufacturing methods. The shaft is fully protected from the liquid to be pumped by means of fully enclosed PTFE gasket between the impeller nut-shaft and shaft sleeve. the properly dimensioned shaft exhibits minimum deflection at a stuffing box, resulting in long operational life for mechanical seals.


Bearing Frame

The entire range of pump models is covered in just four number of bearing frames. All pumps belonging to a bearing frame have an identical shaft, bearings, shafts sleeves, and impeller fastenings. In addition to standard sight glass, every bearing frame can be equipped with a constant level oiler. For pumping temperature, more than 180°C or 160°C in case of steam jacketed pumps, a lubricating oil cooling circuit can be fitted in the oil pumps bearing frames.

Polypropylene Pumps

Characteristic Curve

Polypropylene Pumps Flow

Features :

  • Suitable for corrosive duties in the Process and Chemical industries.
  • Can work continuously.
  • Self venting type casing.
  • Dynamically and hydraulically balanced impeller with aerodynamic profile vanes.
  • Pump casing is provided with external metal ring for construction stability.
  • Temp. range is up to 70 °C.

Applications :

  • For handling liquids in various industries like Textile, Paper, Cellulose, Sugar, Steel, Food, Having wide temperature range & Fluid, etc.
  • Ideal for circulation of chemical in metal finishing industry.
  • Natural choice for pickling line & scrubber in steel plants.
  • High capacity transfer pump, filter press for Dyes & Chemicals, Descaling, Oil & other fuels.
  • Water treatment plant, Effluent treatment plant, Electroplating, Pickling & Steel rolling mills.
  • Excellent for transfer and loading-unloading like HCL, Sulfuric acid / Alkali, Caustic liquid.
  • Scrubbing of corrosive gases like NH3, CO2, SO3, SO2, I2, F2, Br2, CI2, etc.

Design :

Horizontal, radically split, one piece volute casing design, fitted with a semi open impeller, single entry single stages. Following standards of PIN 24256 / ISO 5199.


Material Of Construction

  • Casing, Impeller, Backplate : PP / GRP/ UHMWPE / PVDF
  • Shaft Sleeve : GRP / Ceramic / ALLOY-20 / Hast Alloy B/C
  • Bearing Bracket : C.O. GRFG-26
  • Shaft : SS / EN 9
  • Bearings : Double ball bearing

Sealing Options

  • Externally mounted mechanical seal
  • Internal mechanical seal
  • Gland packing
  • Special design for low RPM pumps

PVDF Pumps

Characteristic Curve

PVDF Pumps Flow

Features :

  • Pumps are made of solid PVDF components.
  • There are no lined components.
  • Designed to suit extremely corrosive duties in the process and chemical industries.
  • Suitable for continuous service.
  • Self venting type casing.
  • Dynamically and hydraulically balanced impeller with aerodynamic profile vanes.
  • Pump casing is provided with external metal ring for construction stability.
  • Temp. range is up to 120 °C.

Applications :

  • Water treatment plant, Effluent treatment plant, Electroplating, Pickling & Steel rolling mills.
  • Excellent for transfer and loading-unloading like HCL, Sulfuric acid / Alkali, Caustic liquid.
  • Scrubbing of corrosive gases like NH3, CO2, SO3, SO2, I2, F2, Br2, CI2, etc.
  • For handling liquids in various industries like Textile, Paper, Cellulose, Sugar, Steel, Food, Having wide temperature ranges of materials, etc.
  • Ideal for circulation of chemical in metal finishing industry.
  • Natural choice for pickling line & scrubber in steel plants.
  • High capacity transfer pump, filter press for Dyes & Chemicals, Descaling, Oil & other fuels.

Material Introduction :

  • The fluorinated polymers are widely appreciated for their remarkable chemical inertness and their excellent resistance to aging.
  • Polyvinylidene fluoride offers the specific advantage of easy processing in accordance with all the conventional methods used in the plastic industry.
  • PVDF, Polymerized according to its own special process, offers a high degree of crystalline to that by other processes, resulting among other things in superior thermomechanical properties.
  • Chemically inert to most acids, aliphatic organic compounds, chlorinated solvents, alcohol,etc.

Material Of Construction

  • Casing, Impeller, Backplate : SOLID PVDF
  • Shaft Sleeve : GRP/ Ceramic / Alloy-20 / Hast Alloy B/C
  • Bearing Bracket : C.I. GRFG-26
  • Shaft : SS / EN 9
  • Bearings : Double ball bearing

Operating Data

  • Capacity :  up to 39 m3/hr
  • Head : up to 30 Meters
  • Temperature :  up to 110 °C
  • Speed : up to 3500 RPM
  • Pressure : up to 3 kg/cm2

Sealing Options :

Externally mounted mechanical seal Internal mechanical gland packing.

Magnetic Drive Centrifugal Pumps

Characteristic Curve

Magnetic Drive Centrifugal Pumps Flow

Features :

  • 100% Leak Proof Pumps
  • No Shaft Seal to maintain, replace
  • High Efficiency due to permanent magnet power coupling
  • Simple design, easy to operate & maintain
  • Very useful for handling highly corrosive chemicals plating chemicals, toxic & fuming liquids
  • Improved safety
  • High corrosion resistance
  • Wide range of applications
  • Standard electric motors
  • Reliable in performance
  • Less downtime
  • Simple design
  • Easy maintenance

Applications :

  • For handling liquids in various industries like Textile, Paper, Cellulose, Sugar, Steel, Food, Having wide temperature range & fluid, etc.
  • Ideal for circulation of chemical in metal finishing industry.
  • Natural choice for pickling line & scrubber in steel plants.
  • Water treatment plant, Effluent treatment plant, Electroplating, Pickling & Steel rolling mills.
  • Excellent for transfer and loading-unloading like HCL, Sulfuric acid / Alkali, Caustic liquid.
  • Scrubbing of corrosive gases like NH3, CO2, SO3, SO2, I2, F2, Br2, CI2, etc.

Material Of Construction :

  • All pumps are rated for continuous duty with class E insulation.
  • Max operating Temp 70°C for PP, 120°C for PVDF & 250°C for SS-316.
  • All pumps are Centrifugal type and need priming before startup.
  • Non-magnetic pumps are available up to 5 HP.